ContiTech

North America

Open End V-belts are the ideal solution for problem applications and emergency replacements. They are the perfect answer for applications where endless v-belts are difficult or impossible to install or the endless belt you are looking for is not readily available. Open End V-belting will operate in any drive as long as ARPM standard sheave dimensions are observed and the recommended maximum speed of 3,500 feet per minute is not exceeded. It is not recommended as a permanent substitute for endless V-belts except on drives where standard belts cannot be installed. The horsepower ratings are approximately 30 percent of the published horsepower of our standard v-belts.

Open End V-belt Advantages
  • Easy installation
  • Can keep you running in a pinch
  • Because of differences in the elongation characteristics and variations in cross section dimensions, Open End Pd V-belts and Endless V-belts should not be used together on multiple drives.

1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

Profile

Number of Ribs

Thickness

Total Width

Total Length

Weight

20042039 N/A A N/A 1 N/A 0.310 in7.9 mm N/A 0.500 in12.7 mm N/A 3,000.000 in76,200.0 mm N/A 0.0830 lb0.0376 kg
20042181 N/A B N/A 1 N/A 0.410 in10.4 mm N/A 0.660 in16.80 mm N/A 250.000 in6,350.0 mm N/A 0.122 lb0.0553 kg
20054342 N/A B N/A 1 N/A 0.410 in10.4 mm N/A 0.660 in16.80 mm N/A 500.000 in12,700.0 mm N/A 0.122 lb0.0553 kg
20042279 N/A C N/A 1 N/A 0.530 in13.5 mm N/A 0.880 in22.4 mm N/A 250.000 in6,350.0 mm N/A 0.2010 lb0.0912 kg
20077339 N/A C N/A 1 N/A 0.530 in13.5 mm N/A 0.880 in22.4 mm N/A 500.000 in12,700.0 mm N/A 0.2010 lb0.0912 kg
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1